Fedora:: Setting Up On HP Proliant DL360. Have an HP Proliant DL360 server on which I plan install Fedora 12. I need to download the NIC driver from HP's site - but it asks which operating system - and Fedora is not on the list. However, many variants of Red Hat Enterprise Linux are on the list.
- Drivers for display drivers for new HP ProLiant Server 12. Note, Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee. These servers range from old to new, but they are all Proliant ML150's some are G3 and some are G6. HP ProLiant ML150 G6 Server series, Overview, Hewlett.
- The Service Pack for ProLiant (SPP) is a simplified and consolidated set of firmware, drivers, and system software that provides easy server management, enables a 3x faster online update, and is an integral part of the HPE server update experience. The Service Pack for ProLiant (SPP) and Smart Update Manager (SUM) make it easy to update your.
Similar Messages:
CentOS 5 Hardware :: Setting Up RAID On Compaq Proliant DL580 G1 Server?
Aug 1, 2009how to setup RAID on a Compaq Proliant DL580 G1 Server. Currently there is no OS installed. I used the SmartStart CD but there is no option to setup RAID. When I put in the boot CD for CentOS 5 it recognizes individual hard drives not a RAID Setup.
General :: Install Ubuntu Ver.10.10 Server On HP DL360 With 2 Internal 36GB Untra3 Scsi Drives?
Mar 31, 2011I am trying to install Ubuntu ver.10.10 server on HP DL360 with 2 internal 36GB untra3 scsi drives. The installations seems to have gone fine but upon booting, the OS is stoping at the BusyBox menu with initramfs prompt. None of my boot or root filesystems is mounted here so I can not go further. I've searched all over the net for answers but nothing seems to work.
Fedora :: Proliant G4 Becomes Non-responsive @ 100% Wait?
Jul 1, 2011I've installed both Fedora 15 x64 and Fedora 14 x64 on an HP Proliant DL380 G4 with the HP SmartArray SCSI controller, 2x146GB UW320 SCSI drives.The server was running RH v4 with a hardware RAID 1 with uptime of 400+ days with no issues.I broke the HW RAID and made 2x volumes and software RAID. I have another identical server with 4x 146GB UW320 SCSI drives with Fedora 12 x64 and SW RAID, so I figured 14/15 should be the same process.What happens is the server runs great for a while, but when I leave it for a few hours, it becomes non-responsive. I've re-installed 15 and 14 multiple times now and also installed NRPE, which shows load increasing to the point to where the server is non-responsive. It hits high load levels (as reported by NRPE). The load levels appear to be increasing over time. Such as last night:
log off at midnight, load average 0/0/0
2:03 am - WARNING - load average: 9.91, 8.85, 6.75
3:03 am - WARNING - load average: 16.91, 15.86, 14.47
[code].....
Server :: Intall Fedora 12 (8 ,9 ,10 ) On Hp Proliant DL 380 G6?
Jan 29, 2010We have purchased Hp Proliant DL 380 G6 server after Raid 5 configuratin when i boot server from fedora or redhat bootable cd and i select 'install fedora', after this installation cd is not able to detect hard drive or not able to copy required file in server.
Fedora Installation :: Loses CD-ROM Drive On Proliant 3000?
Apr 3, 2009By way of background: I've been using Linux since kernel 0.97.something_or_the_other, but I've been using one of the other distros. This is my first crack at Redhat/Fedora.
I'm trying to install Fedora 10 on an old Compaq Proliant 3000, dual P-II 450, Compaq Smartarray 3200, plenty of drive space, 3C905 based NIC, original Compaq CD drive.
The install will boot from the CD just fine, I get the initial graphic menu to select whether to do an install, upgrade, etc.
I select option 1 to install and I get what looks like an ncurses based screen that asks me to select a language, another screen that asks for a keyboard, then a screen that asks me if I want to install from CD/DVD, NFS, local drive, etc.
If I select the CD install option, the next screen complains that it can't find a drive and asks me to either select a driver from a list of drivers or to insert a driver disk. Doesn't matter what driver I select, it always snaps immediately back to the screen that says it can't find the hardware to match the driver. Every time it does this, it's not spinning the CD to read the driver that I've selected.
IF I go for an NFS install, after it asks me the network parms I wind up at that same driver screen with the same results, no matter what I pick it throws me back to the can't find hardware/pick a driver screen. As far as I can tell, the NIC is never actually trying to wake up.
I know the hardware is functional because if I boot from from CD with my usual distro it identifies and starts all the hardware just fine, CD, NIC, RAID, etc.
I can see where it might work to have the necessary driver module for the CD on a floppy, but where do I get the module? I tried mounting the .iso images for the install set on another machine but I don't see anything obvious that looks like modules that I can cabbage onto.
Fedora Installation :: Cannot Install 14 On HP Proliant Microserver From USB Stick
Apr 18, 2011I recently purchased HP Proliant Microserver with the idea of having it as a home server running Amahi. I added one 2TB hard disk to the already installed 250 GB drive. The Microserver has no cd/dvd drive so I created a bootable pen drive using LiveUSB Creator tool from Fedora 14 installation DVD iso image. However, I ran into problems in the very first phase though I struggled hard, juggling i386, x64, Live images...
Now, for i386 Fedora: The machine successfully boots from the pen drive but after selecting language and keyboard, the installer does not see the installation image - or even the pen drive at all - saying 'No driver found'. Then, I can only open 'Select Device Driver to Load' (screenshot) where I can only see whole bunch of drivers I have no idea which of to select. I tried 'USB mass storage driver for Linux', nothing happened, I'm returned back to 'No driver found'. Haven't found the 'HP NC107i PCI-Express Gigabit Ethernet Server Adapter' driver in the list...
x64 Fedora: Same result, though x64 at least recognizes the HDDs that are already in the box (screenshot) so I can try to use image files unpacked on the second one (ext4 formatted). Then, the installation proceeds till the point of formatting the installation drive when it suddenly 'Cannot find ISO 9660 image' (screenshot) and I cannot but Exit.
Live x64 image: I tried the Live bootable image from the same pen drive - it booted and installed correctly and at the first glance the system was working fine, connecting to the internet, downloading updates etc. However, this is not my option because I didn't have the option to add additional Repository during the installation from Live image (as it is in this guide, search the page for 'Add the Amahi repository'). why the installation is not working in my setup?
Fedora Servers :: Put Old DualCore PCIe Board Into A Proliant 3000?
Apr 23, 2009I'm wondering if I could put my old DualCore PCIe Board into a Proliant 3000? Why not; I mean, the Array Controller should plug right into the PCI slot on the DualCore board. Of course, I'll have to shoehorn a second power supply into the case for the newer Board, but wouldn't it be a monster! Two 3GHZ Processors, with a 256 MB nVidia graphics card, 1.5 GB of RAM, and 8 Hard Drives! (7, actually, because one of them doesn't work). I'm up late, and I think I'll start working on it right now.
Fedora Hardware :: Install F14 On HP ProLiant ML330 Server But It Doesn't
Mar 9, 2011I've been trying to install Fedora14 on HP ProLiant ML330 server but it doesn't recognize
HP Smart Array P410/512 BBWC controller, and thus won't see HDD's(Raid 1).
HP site lists only theese drivers:
Microsoft Windows Server 2003
Microsoft Windows Server 2003 64-Bit Edition
Microsoft Windows Server 2003 for 64-bit Extended Systems
Microsoft Windows Server 2008 Essential Business
Microsoft Windows Server 2008 Foundation Edition
Microsoft Windows Server 2008 Itanium
[Code]...
Ubuntu Servers :: HP Proliant Dl160 G6 And 10.04 LTS?
Jun 23, 2010Hp Proliant Ml150 G6 Drivers Linux Ubuntu 10
I am about to install ubuntu 10.04 to our DL160 g6 servers with p410 raid card. From the ubuntu validated hardware list, I can see that this hardware is validated to only 9.04. : hp-proliant-ml150-g6-drivers-linux-ubuntu.html..Nearly all other models are validated to 10.04. Have anyone tried using dl160 g6 with 10.04? What kind of problems we might face while trying?
Server :: Proliant ML370 Not Booting To O.S?
Dec 29, 2010HP Proliant Server will not boot to O.S. Upon power-up system performs POST and finally starts looking for bootable device...3 are listed CD-ROM, ?, SCSI.
And then falls into a loop here. No errors that I recognize (I'm newbie to LINUX). Server has 6 SCSI drives and using the SMART START CD, are testing ok. I've broken down box to minimum hardware requirements and was even trying to boot in Safe Mode, if there is even such a thing for Linux.
Debian :: Lenny Work On HP Proliant ML150 G6?
Apr 22, 2010Has anyone installed Lenny successfully on the HP Proliant ML150 G6 platform?
OpenSUSE Hardware :: Proliant Rage Xl Drivers?
Feb 12, 2010i can find this Hardware for Linux - Compaq Computer (by ATI Technologies) / Proliant Rage XL but where do i download these drivers?
Ubuntu Servers :: Streaming From HP Proliant Dl360G4P
Mar 5, 2010I currently have my ftp server running off of my hp dl360. Ubuntu 9.10 server. I cannot seem to stream anything. I can use WINS and mount the share and then watch videos over my LAN like that but I want to stream my media over the internet, I already have a domain and NAT 100% set up with port forwarding. The snag I am hitting is I cannot seem to get streaming to work over the net.
the stats on the DL360g4p (1u rackmount) are as follows
1x Xeon 3.08GHz - 512MB cache
2 GB RAM
2x 300GB SCSI @ 10k RPM in raid0.
gigabit NIC
ubuntu 9.10 server
All web(http/ssh) traffic is forwarded to seperate ubuntu server VM running ontop of ESXi on a different 2u HP proliant dl380g3. All ftp/smb traffic is forwarded to the 1u dl360. I have tried vlc -I http (port 8080 redirected to ftpserver) under a detatched screen window and it failed to initialize video driver. I have an entire Directory that I would like to make available to stream.
Ubuntu Servers :: 10.04 Raid On HP Proliant ML115?
May 17, 2010I have a problem installing Ubuntu on an HP Proliant ML115. This server has a 1TB mirrored RAID setup (and 1 250GB drive), problem is, Ubuntu apparently doesnt like it, it detects the RAID but fails to partition the hard drives and the installation cant continue. I tried the guided partitioning using the whole disk (detected RAID array). Here is what syslog gives me:
May 17 22:32:30 main-menu[504]: INFO: Menu item 'disk-detect' selected
May 17 22:32:30 net/hw-detect.hotplug: Detected hotpluggable network interface eth0
May 17 22:32:30 net/hw-detect.hotplug: Detected hotpluggable network interface lo
May 17 22:32:31 hw-detect: Loading PCMCIA bridge driver module: i82365
May 17 22:32:31 hw-detect: FATAL: Module i82365 not found.
[Code]...
PS: Im very noob regarding this kind of stuff so detailed instructions please, also feel free to give configuration tips
Ubuntu Servers :: Installing 10.04 On Proliant 3000?
Jun 26, 2010I got my hands on my first real server hardware yesterday - a PIII 600 MHz COMPAQ Proliant 3000 with 1.8 GB RAM, Smart Array 3200 controller and 4x18.2GB SCSI ULTRA 3 hard drives. RAM is upgraded from original and USB card added - otherwise hardware arrangement appears to be original.
Minimal 10.04 installed (35 minutes boot to boot) as Server 10.04 could not detect CD drive. My problem? Everything works but it does not look right. Probably my bigger problem?? I know almost nothing about RAID and the more I read the more ethereal my understanding seems to become.
When installing, I chose to install with LVM on c0d0. Grub written to MBR. I have posted df -l, fdisk -l and lshw output below. Would someone tell me if this looks correct and, possibly, offer some pointers if it does not.
Code]...
Ubuntu Servers :: Installing 10.04 On A HP Proliant DL180 G6?
Nov 2, 2010installing Ubuntu 10.04 on a HP Proliant DL180 G6, especially via the LO100 virtual KVM? I can boot almost any linux distro with it, but unfortunately whenever I boot the Ubuntu server cd the screen gets garbled. I did some searching on the net, and found some references to older versions of Ubuntu where one had to add vga=771 to the boot options, but this still doesn't work with 10.04. I tried several vga modes, all to no avail (with vga=normal the screen gets garbled, with anything else the screen just stays black). Anyone got any idea on how to fix this?
Networking :: HP ProLiant DL320 G2 Can Access LAN But Not Internet?
Oct 28, 2010I cannot seems to get my server to access the internet even though I can easily managed to do stuff inside my LAN. I can ping the server on the W7 Computer and vice versa, as well as access it via SSH while inside the network.
Network Map:
Quote:
Modem
|
D-Link Router
| |- Various Network Devices
|
[Code].....
General :: RedHat 5.5 Load Error On HP Proliant DL 380 G7
Jan 20, 2011I have been loading Red Hat OS 5.5 x86_64 version in HP's Proliant DL 380 G7. One of the Server's after triggering the iLO and setting the Server to the determine the hostname so that, it can check the eth0 settings and then it probes for the video adapter, the screen goes completely blue and the characters that are on the screen at this point are not readable at all..Looks like to me the screen is throwing the system characters completely leaving no trace of what's going on. The screen is blue with those characters and the server is freezing...Looks like a hardware iLO issue, but not sure. When I restarted the server, it picked up the PXE boot and loaded windows upto the serial key and all that loading process was readable.
Server :: Install Redhat9 On HP Proliant ML150 G5?
Jan 8, 2010I have One Server HP proliant Ml150 G5 with ARRAY Controller and I want to INSTALL REDHAT9 But OS When I install REDHAT9 IT gives NO hard disk Found ON HP SITE there is no driver for array controller for REDHAT9
Server :: HP Proliant DL160 G6 Graphic Driver?
Feb 17, 2010I am running mandriva 2010.0 Kernel 2.6.31.5-server-1mnb for my web, mail, dns and ftp server. the problem is i couldn't run webmin on that server because of Mandriva can not detecting the graphic adapter
The server is HP Proliant DL160 G6, and the graphic adapter is ATI ES1000. i need the driver
Server :: Install Slakware On HP Proliant ML350?
Sep 26, 2010I try to install linux Slakware 8.0 on HP Proliant 350ML server. I can boot from the CD but then anytime I do fdisk /dev/sda I see a message that the hard drive cannot be accessed. Is there anyting I can do to secceed?
CentOS 5 :: LM - Sensors Proliant Server DL120
Jan 19, 2010I have a proliant dl120 server, with centos 5.4 and I want to monitoring the temperature and fault of the server but the software of hp seems don't work. I have tried to install lm-sensor follow this guide hp-proliant-ml150-g6-drivers-linux-ubuntu.html but the result is:
[root@serverhost bus]# yum install lm_sensors
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* addons: centos.intergenia.de
* base: centos.xengage.it
* extras: centos.xengage.it
* updates: centos.intergenia.de
Setting up Install Process
Package lm_sensors-2.10.7-4.el5.x86_64 already installed and latest version
Package lm_sensors-2.10.7-4.el5.i386 already installed and latest version
Nothing to do
[root@serverhost bus]# sensors-detect
# sensors-detect revision 5291 (2008-06-23 23:40:46 -0700) .....
Debian Installation :: HP Proliant N40L Does Not Boot Into USB Stick
Mar 14, 2015
I have downloaded the 'debian-7.8.0-amd64-netinst.iso' from the official website. I then used dd to create a bootable usb stick. The usb stick is detected by the HP Proliant server but it does not boot from it, even if no other OS is present (so boot order is not the problem, and even if it was, i checked the bios). I tried the original iso in a Virtualbox environment and it worked without a problem.
I then tried creating the usb stick in Windows using 'Unetbootin' and 'LinuxLive Creator'. When I insert the stick into the HP this time it boots from it and all is good. I can not use this approach though, because I want to automate the installation until I can SSH onto the server. But somehow unetbootin and linuxlivecreator overwrite my modified debian isos preseed file (which also works perfectly on a Virtualmachine).I also used dd to create a Ubuntu usb stick and that works without a problem on the HP Proliant.
OpenSUSE Hardware :: Install 11.2 On HP ProLiant DL160 G6 Server?
Jan 26, 2010try to install opensuse 11.2 on HP ProLiant DL160 G6 Server ? i want to know if it's compatible with this server.
Ubuntu Servers :: Blank Screen - HP Proliant Microserver And 11.04
Hp Proliant Ml150 G6 Drivers Linux Ubuntu Windows 10
Aug 3, 2011I've installed Ubuntu Server 11.04 64-bit on an HP Proliant Microserver. The install seems fine but I'm having a start-up problem. When I boot the server, I get a blank screen after the Grub Menu. If I press ALT-F2 I get the login prompt. I've tried editing the grub file (after having done some googling) and tried adding nomodeset to the following line in the grub file:
GRUB_CMDLINE_LINUX_DEFAULT='quiet splash nomodeset acpi_osi=Linux'
I added nomodeset as well as acpi_osi=Linux to see if that would do somethng. After adding nomodeset, when I boot the server, I still get a blank screen after the Grub menu but this time a blinking cursor. Again, if I press ALT-F2 the login prompt shows up. So it boots (I'm able to putty/Webmin in even when the screen is blank) but don't know why I need to press ALT-F2 all the time to get the login prompt to appear. Plus I don't see the boot process right before the login as well.
HP Proliant has the following chipset and processor:
- AMD RS785E - north bridge, core logic controller
- AMD SB820M - south bridge
- AMD Athlon II NEO Processor 1.3 GHz Dual Core
I've also tried adding xforcevesa instead of nomodeset and that option too leaves me with a blank screen.
Ubuntu Installation :: 11.04 On HP Proliant DL 360 G6 - Fails At The Time Of Iso_scan
Sep 1, 2011i am trying to install Ubuntu 11.04 on HP proliant DL 360 G6 but it fails at the time of iso_scan. /var/log/syslog shows 'failed mounting /dev/sda' and menu item iso_scan failed i dont know how to solve this problem its urgent. On server RAID5 is configured
Hardware :: Unable To Install SLES 9 SP3 (Novell OES SP2) On HP ProLiant DL 320 G5p
Nov 20, 2010I Can't install SLES 9 SP3 (Novell OES SP2) on HP ProLiant DL 320 G5p
SATA 82801GR controller
LSI Logic SAS1068 Fusion-MPT PCI-X
HP 8 Internal Port SAS HBA with RAID
SATA CD-Rom TEAC DV-W28S-RS
INTEL e1000 2 port NIC
It seems no CD-Rom was found by SLES as well as no NIC was found. So I can't start install nor using CD or LAN. I started booting from OES SP2 CD 1. The boot loader started normally, but when I chose Installation it says Could Not Find the SLES 9 Installation CD. Activating Manual Installation.
Here in the manual installation screen I check System Information - Hard Disks and CD-Roms It says No Hard Disks or CD-Rom drives have been detected so far Then
1. I erased the BIOS/HD through RBSU
2. downlaod Driver Diskette for HP U320 SCSI Adapter, SAS HBA with RAID, SCxxXe and SCxxGe series HBA (x86 and AMD32) for SUSE LINUX Enterprise Server 9 (x86)
3. startfed installation again.
Now I can see in the manual installation screen - System Information - Hard Disks and CD-Roms MY RAID 1 ARRAY 278GB, but still NO CD-ROM, NO NICS at ALL. Also I have recently updated all firmware, tried changing CD/DVD-Rom adding ordinary SATA HDD, and the result is the same - no CD, no HDD is seen. So I suppose the linux kernel doesn't support my motherboard SATA channels? Additionally, I tried to install SLES 10 SP3 (OES2) and it was success, all the hardware were detected including CD and NICs How can I add driver prior to installation or install using my array HDD?
Hp Proliant Ml150 G6
General :: CD Not Found When Installing RHEL 5.4 On HP Proliant DL380 G3?
Hp Proliant Ml150 G6 Drivers
Mar 3, 2010I've been asked by my boss to install RHEL 5.4 onto a HP Proliant DL380 G3 which we have here. Now I'm a total linux newbie but can figure my way around most things but this has got me stumped.
I have downloaded the RHEL 5.4 i386 DVD iso and burnt it OK. But when I boot from the CD in the server it doesn't recongise it. I put the DVD into any other server/PC and it boots fine. The server also boots fine from other CDs'DVDs?
Anyway, I thought I would try the boot.iso instead so I burnt this and the DL380 boots fine. I try the default install option, select country/keyboard layout/ select local CDROM as the install type and this is the problem now.
It ejects the boot CD so I put in the RHEL 5.4 DVD and it keeps saying:- the red hat enterprise linux server cd was not found in any of your cdrom drives I have reburnt the DVD and same problem. I have also tried creating a VM with the DVD and this boots and installs fine in VMWare so I know the DVD is good.
General :: Install SUSE 11 On HP-proliant-D380 Server?
Oct 10, 2010
Hp Proliant Ml150 G6 Drivers Linux Ubuntu Windows 7
How I can install SUSE 11 on HP-proliant-D380 server after windows 2003 server that already installed.?(I want to keep Windows)